Do you by any chance have an old necklace you have to get rid of? Are your earrings broken? In case, you have pieces that have seen better days and are thinking of selling or throwing them out, think of jewelry repair first. Do you know that your broken pendant or loose stone can be fixed easily?
Repairs that you think is complicated like watches are no problem with a jewelry store like Sachs Jewelers. It can be repaired at an affordable price, so take your piece in today. Here are a few things you should know about jewelry repair.
Custom- Designed Jewelry Repair
If you bought your custom designed jewelry from a jewelry store near you, they will surely provide professional help in repairing the jewelry. If you do not have the advantage of the same jeweler near you, then it is advisable to get the jewelry repaired from a store that has skilled people to handle the jewelry with a name in your neighborhood.
Know your jewelry
It is good to know the basics about your jewelry when taking it for repairs. Like the weight of the metal, you will know the statistics of the piece of jewelry you have from the carat weight of the gemstones used. You will have to check the weight of the piece after it has been repaired.
A piece of jewelry that has been repaired will not have any marks of hammering with any tool. It should be free from seams made by cutting or soldering. The stones should be placed properly in the prongs.
Changing the size of the ring
If you are getting a ring resized, it is perfectly done by three techniques namely cutting and soldering: the ring is cut and then soldered to fit the size of the wearer. Sizing beads are placed on the inside of the ring to fill in any differences in size.
When repairing a chain, it may not be as strong as it used to be but it won’t become fragile to handle a light gemstone either.
Wearing the ring regularly could result in minor wear and tear of the prongs which could loosen the diamonds. It is always advisable to get it repaired on time and avoid any more damages.
Jewelry repair is a high skill. Some might even argue that it takes more craftsmanship to repair an item of jewelry than to design it. Whatever the case, sooner or later, you might have to get your jewelry repaired and it pays to know what goes into it.
This post from Jewelers of America is detailed enough to provide you with the basics of jewelry repair.
Fine jewelry is susceptible to wear and tear, so always have your fine jewelry checked annually by your jeweler. When repair issues do come up, this is a guide will help you get the best service.
Jewelry Repair Services
If a jewelry store offers custom design work, most likely they have trained jewelry craftsman on site to perform repairs in house. Of course, there are items – like timepieces – that may need to have repairs done off site. Start by checking that the jewelry store is a member of Jewelers of America – so you know your jewelry is in skilled hands and the repair will be performed professionally and ethically.
Before You Go
It’s always good to have a sense of the value of the piece for the jewelry store’s insurance purposes.
As with the custom design process, the jeweler will evaluate and give you a quote for the cost and time of the repair work. No work should be done without your permission.
Common Jewelry Repair Issues
In a good jewelry repair the repaired area has the same color, luster and appearance as the rest of the piece:
No hammering or other tool marks are visible
No visible seams from cutting and soldering, like in rings or chain repair
Stones are tight and secure in their settings (channel, prongs, etc)
Resizing a Ring
If too loose or too tight, there are a few ways a jeweler can resize your ring:
Cutting & soldering: A cut is made and metal is either added or removed to adjust the size to fit. Sizing should be done at the center of the shank bottom, unless there are quality marks or an inscription that precludes it. No seams should be visible when finished.
Sizing beads: placed on the inside of the bottom of the shank, these accommodate slight discrepancies in size for a half size or less
Spring inserts placed inside the shank adjusts to 1-2 full finger sizes.
A chain after being repaired is never as strong as it was before it was broken. While most flat chain repairs are nearly undetectable, if the chain is very small, lightweight or badly damaged, there may be some stiffness in surrounding links after the repair is completed. Chains that are more difficult to repair due to their complexities include link chains, like rope and cable chains, and herringbone chains. Some jewelers may charge extra for these jewelry repairs.
Constant wear of rings can cause prongs to wear and the potential for losing a precious gemstone to increase. Something as simple as exposure to bed sheets or gardening can affect prong strength. Depending on the severity of the prong wear, they will be replaced, re-tipped by adding a metal to the top of the prong, or replacing the entire prong head. When repaired, prongs match in size, shape and dimension. They should completely go over the crown of the stone, ensuring prongs won’t snag clothing.
Here are some frequently asked questions from the same post.
Can I take my jewelry for repair to a different store than where it was purchased?
Yes. Take it to any jewelry store you have confidence in that has the qualifications you trust. Use our JA Jewelry Store Directory to find Jewelers of America member jewelry stores near you.
How do I know I am getting my own diamond back after a repair?
When you work with a jeweler you trust, like Jewelers of America members, this shouldn’t be an issue. Still, don’t be afraid to mention your concern, most jewelers are happy to ease your mind. Some jewelers show the diamond to their client under a microscope to indicate that diamond’s unique characteristics, which you can view again when you retrieve the piece. Some even take a picture of it. Like fingerprints, no two diamonds are exactly alike.
How can I tell if my gemstone or diamond is loose?
In between your regular check-ups at your preferred jewelry store, you can check for loose gemstones by touching them with a toothpick. If the stone moves, bring it to your jeweler for tightening.
My diamond is chipped; can it be repaired?
Unfortunately, there is no easy way to repair a chipped diamond. This is often a shock considering diamonds are one of the hardest materials on earth. However, if hit or dropped on the right angle it can splinter. If this happens, the diamond will have to be replaced, unless it is large enough to be recut. Make sure your jewelry insurance policy covers chipped diamonds in addition to loss.
To keep your jewelry from getting damaged or ever requiring repairs, the Jewelers of America website suggest you take the following steps
Store your jewelry in a clean, dry place.
Keep your jewelry in a fabric-lined jewelry case, or in a box with compartments and dividers. If you prefer to use ordinary boxes, wrap each piece individually in soft tissue paper.
Don’t jumble your jewelry pieces in a drawer or jewelry case. Pieces can scratch each other.
Be careful when removing your jewelry to wash your hands. Do not leave your jewelry on the rim of a sink where it can easily slip down the drain.
There are many types of small machines on the market that will clean jewelry in a matter of minutes using high-frequency sound. These machines are called ultrasonic cleaners and are available in many different models and prices. Your local jeweler can tell you if an ultrasonic cleaning machine is right for your jewelry wardrobe and, if it is, recommend an appropriate model.